产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

护坡塑料模鉴定方法

网址:www.zunshengbaowen.com  2022-08-10  作者:admin    阅读:

护坡塑料模鉴定方法
Identification Method of Plastic Mould for Slope Protection
外观鉴别
Appearance identification
通过观察的外观,可初步护坡塑料模具鉴别出护坡塑料模具制品所属大类:热塑性护坡塑料模具,热固性护坡塑料模具或弹性体护坡塑料模具。一般热塑性护坡塑料模具有结晶和无定形两类。结晶性塑料外观呈半透明,乳浊状或不透明,只有在薄液压钢坝  膜状态呈透明状,硬度从柔软到角质。无定形一般为无色,在不加添加剂时为全透明,硬度从硬于角质橡胶状。热固性护坡塑料模具通常含有填且不透料明,如不含填料时为透明。弹性体具橡胶状手感,有一定的拉伸率。
By observing the appearance, we can identify the main types of plastic moulds for slope protection: thermoplastic moulds for slope protection, thermosetting moulds for slope protection or elastomeric moulds for slope protection. Generally, there are two types of thermoplastic moulds for slope protection: crystalline and amorphous. Crystalline plastics are translucent, opaque or opaque in appearance, only transparent in the film state, with hardness ranging from soft to horny. Amorphous is generally colorless, transparent without additives, harder than keratinous rubber. Thermosetting plastic moulds for slope protection usually contain fillings and are opaque, such as transparent without fillers. The elastomer has a rubber handle and a certain tensile strength

返回新闻

网站出租电话
13313028229