方形井模具.方形检查井模具.圆形井模具.混凝土检查井模具.污水井模具.电力检查井模具.一体式检查井模具-检查井钢模具-使用与说明会说明模具的使用步骤，像模具是可以使用预制或者使用现场浇筑的方式来对混凝土预制件进行生产的，他们的区别在于一种是使用现场制作的方式，另外一种是把混凝土预制件制作出来之后，运输到使用场地中进行摆放使用，不管是使用预制的方式，还是使用现场制作的方式，都需要避免模具损坏的状况出现，以免模具的使用寿命受到一定的影响，一体式检查井模具使用的时候，因为是由内膜以及外模共同组成的，所以在使用的时间，需要把模具的外模组装好以后把模具的内膜也组装好，把模具组装好以后，需要把模具的外模放置到模具的外模中，在模具预留的注浇筑口中倒入需要的混凝土，把混凝土倒入模具中以后，使用震动棒把模具中的混凝土中出现的气泡震动出来，然后把模具进行静置，静置一段时间之后，模具中的混凝土就凝固了，一体式检查井模具不管是现场浇筑还是预制的方式，都会使用相同的制作方法来进行制作，使用到的时间都不会很多。
Square well mould Square inspection well mould Round well mould Concrete manhole mould Sewage well mould Electric inspection well mould The use and instructions of the integrated inspection well mold - inspection well steel mold - will explain the use steps of the mold. For example, the mold can be produced by prefabrication or on-site pouring. The difference between them is that one is made on site, and the other is after the concrete prefabrication is made, When transported to the use site for placement and use, whether it is prefabricated or made on site, it is necessary to avoid mold damage, so as to avoid a certain impact on the service life of the mold. When the integrated inspection well mold is used, it is composed of inner membrane and outer mold, so during the use time, After the outer mold of the mold is assembled, the inner membrane of the mold shall also be assembled. After the mold is assembled, the outer mold of the mold shall be placed in the outer mold of the mold, and the required concrete shall be poured into the reserved pouring opening of the mold. After the concrete is poured into the mold, the air bubbles in the concrete in the mold shall be vibrated out with a vibrating rod, and then the mold shall be placed still, After standing for a period of time, the concrete in the mold will solidify. The integrated manhole mold, whether cast in situ or prefabricated, will be made by the same manufacturing method, and the use time will not be much.